What is a Bidet?
Bidets are specifically for cleaning your bottom regions after you use the toilet. How does RV bidet work? You sit on the fixture, turn on the faucet, and a stream of water does the job. Read on to have more insight.
Can you Install a Bidet on Your RV Toilet?
If you, like me, couldn’t imagine life without a bidet, Can you put an RV bidet in your toilet? You may be asking the same question. I’m happy to share some fantastic news with you. You can install a bidet on your RV toilet. You’ll need to follow the instructions outlined below:
- Remove the new toilet and bidet from their boxes and the toilet seat from the new toilet.
- Attach the bidet to the toilet (following directions provided in the bidet box).
- Connect the bidet’s back to the braided metal tubing that came with it.
- Get a new toilet seat.
- Turn off the water supply and drain connections to the rig.
- Remove the water line from the toilet’s rear.
- Remove the toilet base bolt covers.
- To loosen and remove nuts, use the proper socket or wrench.
- Remove the toilet from the working area and place it in a heavy-duty garbage bag (to prevent water from leaking).
- Using the Oatey plug, close the sewer pipe.
- Attach the Barb Ball Valve to the current exposed PEX pipe with a clamp (if desired, this will give you an easy shut-off at the toilet should you need it in the future).
- Check to see if the valve is off.
- To test the valve, turn on the water.
- Reverse the water flow.
- Cut 4 to 2 inches (10.16 to 5.08 centimeters) lengths of PEX pipe.
- Attach a plastic T to one end of the 2-inch (5-centimeter) PEX pipe fragments pieces
- Attach the open end of the PEX Pipe to the Ball Valve with clamps. Attach the final two sections of the PEX Pipe, one on each side of the T, with clamps.
- Attach a 90-degree plastic elbow to the PEX pipe on the right side of the T with clamps (optional).
- Attach one brass male adapter to the open PEX pipe on the left side of the T using clamps.
- Use clamps to join two pieces of plastic elbow to a PEX pipe (optional).
- Connect the open end of the PEX Pipe with a brass male adaptor.
- Tighten the nuts and put the toilet on the toilet bolts.
- On one end, connect a braided steel supply line to a brass male adapter, and on the other, connect the toilet in-flow.
- Connect the open end of the bidet’s braided supply line to the brass male connection on the T’s left side.
- Turn the water supply on at the main and the ball valve to the on position.
- Check for leaks.
- Test the Bidet
The Four Different RV Bidets
Best Bidet Attachment for an RV
A built-in toilet attachment is one of the most popular bidets in America. These little RV bidet sprayers attach to the seat and have buttons, levers, or dials to control the water flow. They never need to be removed or reattached, and they take pure water from the toilet’s reserve.
These toilet attachments are incredibly lightweight and straightforward to set up. This type may not be suitable if you use a composting toilet that does not use freshwater. These toilet attachment bidets are a fantastic option because most RV bathrooms include a plumbing system.
You’ll need an attachment if you want to add a Dometic RV bidet to your RV toilet. This is simple: it’s more likely to fit your toilet than a bidet seat, and it’s also easier to use than a bidet hose. There are two self-cleaning nozzles on the bidet, one for backwashing and feminine cleansing.
You can control the water pressure using the side panel knob. Unlike other bidets, you can adjust the pressure on a sliding scale rather than increments.
Install a Bidet Attachment onto Your RV Toilet
In certain circumstances, a bidet is a separate equipment altogether. It isn’t linked with the toilet but sits close to the bathroom. Classic bidets are usually stand-alone machines, but they have evolved a bit over the years.
You can easily place a permanent bidet in an RV, but it’s probably not the most straightforward. You would need to get it specifically installed and arrange separate plumbing. If you live out of your RV full-time and prefer the comfort, you should keep it in mind as an alternative.
If you don’t mind getting your hands dirty, there are a few DIY methods for integrating a permanent bidet into your RV. You can opt to install a bidet seat, a bidet attachment, or a handheld bidet. There are pros and cons to each type.
Bidet chairs are the most abundant option, as they can offer features like heated seats and many spray modes. But they’re also the trickiest to install, and you might have difficulties locating one that will fit your toilet.
Handheld bidets sit outside your toilet, so they are the easiest to install, and you don’t have to worry about if they fit your toilet or not. However, they don’t give the same user experience as an integrated bidet.
Bidet attachments fit underneath your toilet seat. An attachment offers a nice compromise between being easy to install and easy to use.
Below is the most straightforward step-by-step technique of how to install a bidet that doesn’t require many tools and should take roughly half an hour:
Step 1: Draw a line on your PEX pipe to indicate where you want to cut it. Make a mark on the PEX pipe where you want to install the tee connector by measuring and marking the location. Place the bidet on the toilet and check the location of the bidet pipe on your PEX pipe. This is where you should make a name for yourself.
Step 2: Cut the PEX tubing in. Cut the PEX pipe as straight as you can. Take care not to leave too large a gap; the pipes can be brittle, so proceed with caution.
Step 3: Connect the PEX 12-inch (30.48-centimeter) tee connector to the PEX 12 inch (30.48-centimeter) tee connector. Connect both ends of the cut PEX pipe with the straight edge of the push-to-connect tee-connecter. The PEX pipe should now be in good working order.
Step 4: Connect the extra piece of PEX to the tee-third connecter’s connection. Connect the loose end of the push-to-connect tee-connecter to your extra piece of PEX tubing. Ensure the extra piece of PEX tubing is long enough to accommodate the bidet pipe. This is where you’ll eventually connect the bidet pipe to this piece of tubing.
Step 5: Connect the 12-inches (30.48 centimeters) PEX pipe to the 12-inches (30.48-centimeter) male tee adapter.
Connect the loose end of the extra piece of PEX to the 12-inches (30.48 centimeters) PEX pipe to the 12-inches (30.48-centimeter) male tee-push-to-connect adapter’s end. You’ll now have a makeshift tee adapter to install the bidet or bidet attachment.
Step 6: Attach the bidet pipe to the t-adapter- you can connect the bidet pipe to the 12-inches (30.48centimeter) male tee adapter. Finally, inspect the bidet for any leaks. You should be good to go.
No Installation Rechargeable Bidet – Best Of Both Worlds
Installing a portable RV bidet sprayer in a bathroom is another option. Because these sprayers use water, you must connect them to a sink, a plumbing line, or even a pail of water. Several models are available, but they all work in the same way.
Connect them to a water supply once you finish using the toilet and turn on the sprayer. Many individuals like hand sprayers because they may direct the water flow easily. They also don’t necessitate complicated installations and are simple to attach and detach. Handheld sprayers might be a fantastic choice if you seek an easy-to-use RV bidet.
If you don’t want to make any permanent changes to your RV, the Portable Wash battery-powered bidet sprayer is another suitable option.
This item looks and functions like a standard handheld bidet sprayer, but instead of drawing water from the mains, it draws it from a bucket or a sink. The bidet comes with a suction holder to hang on the wall. You can power it using a battery which you can recharge (includes a USB power cable).
Water conservation is critical when you’re on the road in an RV. Because it must feed on a pre-filled bucket or sink, this machine makes it simple to measure and control how much water you use.
You don’t always want to meddle with what you already have. There will be no use of power tools, and there will be no risk of harm or difficulties to your beloved RV. After all, if you’re considering resale value, there’s a considerable risk that the next buyer won’t appreciate your changes.
If this describes you, a portable bidet could be the perfect option for staying clean while traveling in your motorhome. There are two types of portable bidets: electric and manual. Manual variants are bottles with a spray nozzle, but batteries typically power electric models.
The most petite and practical choice on this list is a portable bidet. They can be stored in the bathroom of an RV or brought on camping excursions. These are typically small, portable bottles with a water supply. They have an angled nozzle that sprays water when squeezed or actuated. Both manual and battery-operated portable bidets will get the job done!
There’s also no need to install or connect any plumbing. Portable bidets are little water bottles that you can use to replace toilet paper. They’re ideal for hiking and other outdoor activities with limited access to a bathroom.
FAQs on RV Bidets
Can You Use an RV Toilet Hand Sprayer as a Bidet?
You can use the hand sprayer on your RV toilet as a bidet. However, whether you are comfortable using the bidet while manipulating the foot pedal to pour the water will determine its viability. This improvised solution seems to work for several RV bidet fans.
Do RV Bidets Use Hot Water?
Bidets that are portable or electronic have their designated water source, allowing you to choose the temperature. Only cold water will flow from bidet accessories connected to the RV’s water supply. If you put an electric seat into an outlet, it can provide both hot and cold water.
Can You Install an Electronic Bidet in Your RV?
It is possible to install an electronic bidet in an RV, but it won’t be easy. You’ll need an outlet near the toilet and a toilet seat that fits your toilet. As many RV toilets do, if your toilet has a hump, you will need to remove part of the hump to fit an RV bidet toilet.
The Pros and Cons of an RV Bidet
- This gets the job done in most cases, but it can be pricey over time. Furthermore, most RV toilets aren’t suitable for handling a lot of flushed toilet paper, so if you use too much, you risk clogging your system.
- Clean and hygienic: A bidet eliminates the need to wipe, which can quickly spread germs to your hands. It sprays with clean water and is completely hands-free! It is, in many circumstances, more hygienic than using toilet paper.
- Bidets exist in various shapes and sizes. If you don’t like it, you could use a toilet attachment instead of a hand sprayer. Portable versions are also simple to use and travel! Everyone can find bidets that suit them.
- Mold and mildew buildup: Unfortunately, bidets have a few disadvantages. Mold and mildew growth are possible because they run on water and occasionally leave a pool of standing water between uses. Heated bidets are particularly prone to this issue, so be cautious if you choose one of those varieties.
- Some installation required: If you pick a bidet for your RV that isn’t a handheld one, you will require some installation. They require a water source to function, so you may need to connect them to a sink, shower, or toilet plumbing. This isn’t a big deal, but some bidets are more challenging to install than others.
- They consume more water: When RVs don’t get linked up, they only have a limited amount of water. A bidet could deplete some of your limited supplies if you’re dry camping and relying only on your storage tanks.
How to Install an RV Bidet
Are you wondering if it is possible to install an RV Bidet? If yes, then how? Here are a few steps on how to do an installation:
Step 1: Remove the old toilet first. This is a simple task that only requires a few tools. Because you could not easily remove the current clamp, we had to cut the PEX line from the floor.
To prevent odors from escaping into the rig while working, you might wish to install a sewage cap. Place the old toilet directly into an industrial-strength waste bag to avoid a mess.
Step 2: Attach the bidet to the new toilet according to the bidet’s instructions. You can also do this before you remove the old toilet. It all comes down to how much space you have.
Step 3: Make a T with a PEX pipe from the water inlet. The bidet side will connect to the toilet inlet, while the other will connect to the bidet. Depending on your water connections and how much area you have, you may want to add elbows to one (or both) ends of the T.
Step 4: Install the new toilet and connect the toilet and bidet to the appropriate lines.
Step 5: Check for leaks in the water lines. We usually wrap all lines in paper towels and have one person keep an eye out for leaks while the other turns on the water. We remove the paper towels and continue after we’re confident there are no leaks.
Step 6: Check the bidet for proper positioning (do this while seated, or you’ll be cleaning up a wet mess on the toilet’s opposite wall).
Step 7: Take pleasure in your spotless tush!
The Final Say
Bringing a full bathroom with you wherever you go is one of the most appealing aspects of traveling in an RV. Suppose it includes at least one bathroom in the floor plans of almost all motorhomes, travel trailers, and fifth wheels. However, the most common fixtures are a toilet, sink, and shower.
In your RV, you can certainly install a bidet! Some appliances work in conjunction with the existing toilet, such as a portable bidet, a battery-powered sprayer, or attachments, which often come as separate items. If your RV bathroom has enough space, you could also install a separate permanent bidet.
One of the most appealing aspects of owning an RV is the ability to customize it to meet your specific requirements. For many people, having a comfortable and functional bathroom is a top priority, so the fact that you can add RV bidets is welcome news.
You had questions like, ‘can you put a bidet on an RV toilet? This article has placed you in an excellent position to decide which RV bidet to install in your toilet and how to do so.